Advice:It is better to buy a solar cell to build your solar panel rather than try to build your own solar panel with diy solar cell because it can save you more time when it comes to the installing part

It’s probably one of the best guide which contain unique step by step guide to make your house solar-powered using your own solar panels.


I met the owner once before and I must say he is a very classy person, and I guarantee you will get the CD shipped to your home/office address ($5.95 S&H fee), you can also download the solar system plan immediately in the download section.

–>Download the DIY Energy Guide Here<--

Steps to Build Your Own Solar Cells
Step outlined below is not necessary but you can always try it



First and foremost, building your own solar cells isn’t a viable alternative to buying commercial solar cells off of the Internet and straight to build your own solar panels; even buying scratch-and-dent is going to be less expensive than this. However, if you’re looking for something that you can use as a science fair project, this can do the trick.

We’re going to explore the photo-electric effect that got Albert Einstein the Nobel Prize (for Chemistry, not Physics, surprisingly. Einstein never won the Nobel for relativity.) The Photo-electric effect is what drives silicon wafer solar cells; it takes photons in to a semi-conductor layer and shakes loose electrons, creating a current. The original substance that this was observed in was cuprous oxide in the 19th Century, and we’re going to recreate this experiment.

To do this, you’re going to need to get two sheets of copper and an electric stove. You want a heating element that will get very hot – a gas stove won’t do it. After cleaning the copper with a wire brush, and soaking it in dishwasher soap to remove your fingerprints and oils, put the sheet of copper on the burner and turn the heat up to the maximum. As it gets hotter, you’ll see color patterns show up in oranges and purples and reds; eventually it will turn black.

The black covering is cupric oxide, which is what we don’t want – but let it accumulate anyway; while it’s accumulating, it’s shielding the more valuable cuprous oxide from the air, and letting that form. After the sheet has gotten very black (about 30 minutes), turn the stove down and let it cool off slowly. This will have the black oxide crackle and flake off and leave the multi-colored oxide behind. Give it a light rinse in clean water – no scrubbing or flexing – to remove the last of the easily removed black oxide.

Now, we’re going to put the copper plate in a clear container with some salt water, and the other copper plate. We need to put both of them into the salt water, with the lead going from the cuprous oxide plate to the negative terminal of our voltmeter. If you set this in sunlight, you’ll see that the voltage increases; when it’s in shadow, it’ll still show some voltage, because copper plates in salt water are a very primitive battery.

Now, before you think about how you’re free to buy copper plates and generate your own electricity, here’s some numbers – this solar cell design is good for about a quarter watt of power. You’d need several acres of them to equal the efficiency of a rooftop solar array, and because they’re made of copper and salt water, they’re going to oxidize into uselessness in about 9 months. Plus, copper plates are more expensive in bulk than buying slightly dented solar cells off of ebay, which are more efficient and last longer.

So if you ask me it’s better if you buy commerical produced solar cells, than try to build your own solar cells. What I would advise you to do is to buy the solar cells out of ebay and then make the solar panels yourself. You save hundreds if not thousands of dollars doing this. Now you know how to build your own solar panel, give it a try. Why? because the future is green.

Home Solar Panel

Solar Energy for Your Home

“How to make a solar panel and get solar energy for your home?” If you really want to build and install a solar panel into your home, you can’t miss these basics and useful information in the installation process. After you learn how exactly the solar panels works you will find that to build solar panels for your home is just a plain simple process. Solar energy is an alternative energy and it is included also in the group of renewable source.

Logically you will need some solar modules as they are the main ingredients which needed to convert sunlight energy into electric power you can use for. The solar components is totally exposed to the sunshine to make sure the solar cell(also known as photovoltaic cell) surface achieve maximum exposure for the sun power. The sun energy will then become our usable electric, we are using solar electricity!
(watch the video at official site)
 
First you don’t want a mistaken installed solar system, so you will need to mount the solar panel on a steel frame and place it on your roof. The volts, amps and watt generated will depends on the place, if it is a “perfect sunny place” then you will save extra more than 70% on your electric bills which is calculated in kilowatt per hour, it will surely slash your total cost of utility bills. Green power does the job, who don’t want solar energy for home?

You also need to understand the energy produced by this “sun system” is in DC(direct current) form, it will then turn and convert to AC(alternative current) by the power converter. Generally, alternative current is the current electric format that we’re using in our households appliances. Next, the electrical power flow to the electrical service panel from the power supply unit, PSU(that transfer energy from your solar cells). It will then deliver the electric to various parts of your home for use.

If the energy produced from the solar power system you have made is excessive, it won’t burn your home down so don’t worry about it because the extra electricity will be transfer into the grid through the utility electric meter. Without understanding more about how the energy works and distributed between the state infrastructure that connects every home, your neighbor and commercial facilities, let’s get started and get into the process, get solar energy for your home.

Watch the video below (made by one of my friends):
Length: 5 minutes
Solar Panel Board

Build Off-Grid-System

Make a Solar Panel For Your Home

As I said earlier, this isn’t some rocket science and it is not a daunting task but it need some upfront cost as your solar investment because you are now using solar power kits to produce a smart energy system which take the power from the mighty sun directly to the solar panels and it is a renewable energy! This is what your local power providers can’t provide and this is also the solution to the carbon emissions problem.

Free Energy – Solar Panel Home

The Components and Tools You Need to Build Your Solar Panel:

1. Solar Cells

Of course you can’t miss this core modules in your solar powered house, the video below explain and describe how the photovoltaic cell is made. You can purchase some of the components from your local hardware store.

2. A Copper Made Wire

Wire the solar energy systems up and delivers the electric into your home appliances.

3. Clear PVC Sheeting

Solar panels are fairly fragile and finespun, this is the reason you need PVC sheeting as an extra “security shelter”

4. Some Tools

99% of us should have these tools already anywhere in our home

• 
• 
• 
• 
• Of course you will need other tools as well like wire stripper, crimping tool…

You might want do finish all of these setup in a correct way without mistake, so I recommends you visit the following website because it will provide you a set of professionally designed instruction in video format and also great ebook that you can download. With the provided accurate and precisely done measurements and the properly installation graphics that cannot be found anywhere else, you’ll find out this is a very well worth investment because everything is explained very crystal clear and in step by step manner

Official Site to Buy the off-grid system Guide

NOTE:Make sure the order form has https://ssl.clickbank.ne……
It is because for https connection with 128-bit encryption your transaction will be 200% SECURED

Also the order form will looks like this:

Solar-powered house is very flexible because you can just start build come panels for your house first then if the performance is beyond average you might consider to expand it and make an extra solar panels! Just plan your place usage smartly or you can utilize your rooftops to “land” you solar panels because it is a readily available extra square inch for you to heating the solar panel for your home. After that you will starting realize that you can allow more energy consumes for your house and at the same time maintain your power bills number.

Picture1

How is a Solar Power House Looks Like?

Here are Some Example of House with Solar panel Installed

Picture2

Solar Panels on rooftops

Side view of a house

You should start build and make your own solar panel for your home as I do because not only you’re helping our planet, it is very energy efficient too, ride on this wave of future energy and go green, I truly believe you will benefited from using green energy, and impress your neighbor! While they pay the power bills you get the solar energy for your home.

“Make Sure to Leave Your Comments Below After You have Made Your First Solar Panel System!”